|
|
||||||||
| Home | Safety Edges & Mats |
LED Indicators & Sounders |
Gate & Door Control |
Connectors | Control Gear | Wireless & Remote Control |
You are here: Products | Connectors
|
M12 Connectors M12 Connectors are based on a fine threaded M12 x 1 mm coupling nut with a single keyway for contact location. The single keyway or A-Code connectors are available in 3, 4, 5 and 8 pole in all moulded, field attachable and receptacle versions. The range includes 3 and 4 pole LED versions for indicating power and signals on a proximity sensors in either a straight or 90 degree body. Also there are fully shielded connectors available in the moulded range where the shield from the cable is connected via an internal shield in the connector to the coupling nut for continuity to the receptacle. The M12 connectors are rated water proof to IP68. |
 |
|
M8 Connectors M8 Connectors are based on a fine threaded M8 x 1 mm coupling nut, also available is the push or snap fit version. In the M8 range, the keyway for the connector is provided by the configuration of the contacts. Both the moulded and field attachable versions achieve IP67 with the former available with PVC or PUR cable. The M8 receptacles are pre-wired with individual PVC wires to a set length and are ideal for sensor or panel mounting. In the moulded range there is a 3 pole LED version for proximity sensors, which provides indication of power and output from the sensor in a 90 degree connector body. |
 |
|
DIN 43650 (EN175301-803) Connectors The DIN 43650 connectors also conforms to EN175301-803, we have the following versions available Form A and bother the Form B and Form C in DIN and Industrial formats. When choosing this format of connector it is important to make sure you have the correct version. This can be done by checking the contact spacing for each type of connector, for example the Form A contacts are spaced 18.0 mm apart. |
 |
|
Special Assemblies We specialise in providing connectivity solutions for our customers. These can be simple modifications to standard products - receptacles terminated with a PCB connector for example or more complicated solutions such as moulded splitters. In each case we help you develop a cost effective solution to meet your requirements, by working with our suppliers and our own manufacturing resources to achieve the desired connectivity system. |
 |
|